PUJARA ALLOY STEEL CENTRE PVT. LTD.

Bright Steels for Bright Future!

PUJARA ALLOY STEEL CENTRE P. LTD., Chennai
28-A, Mooker Nallamuthu Street,
Parry's,
Chennai, Tamil Nadu 600 001
India
ph: (044) 25221892
alt: (044) 25228514
pujara@pujarasteel.com

Tech-Specs- ALLOY STEELS

GRADE	CHEMICAL COMPOSITION
GRADE	AISI	C	Mn	Si	Ni	Mo	Cr	Others
EN-8	1040	0.35 / 0.40	0.6 / 1.0	0.05 / 0.35				S & P 0.06 max
EN-9	1045	0.50 / 0.60	0.50 / 0.80	0.05 / 0.35				S & P 0.06 max
EN-19	4140 / 42	0.35 / 0.45	0.50 / 0.80	0.1 / 0.35		0.20 / 0.40	0.90 / 1.50	S & P 0.05 max
EN-24	4340	0.35 / 0.45	0.45 / 0.70	0.10 / 0.35	1.3 / 1.8	0.20 / 0.35	0.90 / 1.40	S & P 0.05 max
EN-31	52100	0.90 / 1.20	0.30 / 0.75	0.10 / 0.35			1.0 / 1.60	S & P 0.05 max
EN-36C		0.12 / 0.18	0.30 / 0.60	0.10 / 0.35	3.0 / 3.75	0.10 / 0.25	0.60 / 1.10	S & P 0.05 max
								S & P 0.03 max
HCHCr	D3	2.0 / 2.35	0.25 / 0.45	0.10 / 0.35		0.80 Opt	11.0 / 13.0	V - 0.80 Opt
								W - 0.75 Opt
OHNS		1.0	0.9				1.0	V-0.2

The above information has been provided in good faith. We shall not be responsible for any error / omission.

FEW APPLICATIONS:

EN-8: Bolts / Nuts, General Constructional Purpose.

EN-19: Axle Shafts, Crank Shafts, Connecting Rods, High Tensile Bolts / Studs etc.

EN-24: High tensile strength machine parts, Gear & Pinions, Axles, Shafts, Connecting Rods, Plastic Moulds, Forging dies for smaller section of ferrous and non-ferrous items etc.

EN-36: Recommended for highly stressed parts, Gears, Pinions, Heavy shafts, plastic moulding dies etc.

OHNS: Cutting & gauging tools bushes, sleeves, plastic, moulding dies, shear blades, hardened rolls, press and blanking tools, etc.

HCHCr: Plastic moulding, dies, hobs blanking, shear blades, hot shearing tools, hardened rolls, thread rolling dies, Blade cutters for wire nails, dies for cold nut manufacturers etc.

PUJARA ALLOY STEEL CENTRE P. LTD., Chennai
28-A, Mooker Nallamuthu Street,
Parry's,
Chennai, Tamil Nadu 600 001
India
ph: (044) 25221892
alt: (044) 25228514
pujara@pujarasteel.com